Equipment Sale

Jeneric/Pentron Sculpture Fibrekor™ Conquest Curing Unit. This is a heat and vacuum curing unit. There is no vacuum pump with this. The curing unit is serial number CCU-D000997, rated for 100-120 volts AC single phase input, 50/60 hertz, 3.14 amps total at 120 volts AC 60 hertz (see nameplate picture for other amp ratings at comparable voltages).

You need to provide your own vacuum pump and flexible vacuum hose for running the unit on your own. The power cord from you for the vacuum pump needs to be connected to the horizontal style receptacle on the back of the curing unit.

The curing unit here is in fine condition, working fine, fully checked out in our lab. The curing unit has a 68 inches long removable AC power cord with standard American 3-prong plug end. The curing unit is 6-1/4 inches in maximum width with the curing chamber door open 8 inches wide maximum with the curing chamber door open fully by 8 inches tall including lifting handle by 11-1/4 inches in depth including hose and cord ends with the chamber door closed 14 inches in depth overall to allow the door to fully open.

The unit has an on/off rocker switch on the top front for turning the unit on/off. The curing chamber door has a rotary latching and tightening of the door type switch on it. The unit has lighted pilot lamps for vacuum, cycle, and heating. There is no original box or manual with this unit.

Model: Sculpture FibreKor Curing Unit
Unit powers on with indicator lights.
Unit Dimensions (L" x W" x H"): 10*6*8
Serial Number: CCU-D
Made in USA

• 
• 
•